Corrosion is a growing concern across industries and the requirements are increasing in environments where accelerating factors such as humidity, heat, and air pollution are combined. The Neutral Salt Spray Test (NSST according to ISO 9227) is one of the most established methods to verify corrosion resistance. Nord-Lock Group has officially raised the corrosion resistance…
New liquid resins and curing solutions from Sartomer
Sartomer, a business line of Arkema, will feature innovations for advanced curing systems at the European Coatings Show, at Arkema booth 4A-313. These liquid resins serve to enhance key performance properties including flexibility, toughness, processability, scratch resistance, adhesion, durability, finish excellence and reactivity of 3D printing, coatings, inks and adhesives market applications. Sartomer’s curing solutions […]
Ultrasonic welding platform meets challenges of critical small plastic part assembly
Emerson has launched a new generation of ultrasonic welders that support the growing demand for the assembly of smaller and more intricate plastic components. The Branson GSX Ultrasonic Welding Platform is an advanced and intuitive flexible joining solution, designed to optimize and ensure quality welds, while helping manufacturers meet project timelines and deliver expected return on investments. Plastic components…
PEM SMTSK Standoffs for quick attachment and removal of stacked components without using screws
PEM SMTSK unthreaded standoffs permanently surface mount on printed circuit boards to enable quick attachment and removal of stacked components without requiring screws or tools. Their barrel design allows for a stacked board or panel to be slipped easily into place and then detached by simply sliding the component sideways and lifting it off. These…
JW Winco now offers expanded range of rod end bearings
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has an expanded range of Rod End Bearings available, including GN 648.1/GN 648.2 Steel Zinc-Plated, Tapped Type or with Threaded Stem and GN 648.5/GN 648.6 Stainless Steel, Tapped Type or with Threaded Stem. The GN 648.1 and the GN 648.2 zinc […]
Protecting Concrete from Fire Damage Using Rubber Tires
There may be a new way of protecting our concrete from fire damage using materials recycled from old tires. Successfully tested by researchers at the University of Sheffield, the team used fibers extracted from the textile reinforcement that’s commonly embedded into tires. Adding these fibers to the concrete mix reduced the concrete’s tendency to spall,…
Rubber spacer disks vulcanized, with steel plate from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available, GN 438 Vulcanized Rubber Spacer Disks, with a Steel Plate. The GN 438 rubber spacer disks provide a dampening and muffling function, protecting surfaces from damage. “By stacking several spacer disks on each other, the spring rate of the…
Retaining magnets are ideal for industrial applications requiring non-permanent fixing
Elesa now offers a line of retaining magnets: flat, cylindrical, U-shaped magnets with pass-through hole, shielded and unshielded for high performance and minimal space requirements. Retaining magnets are an easy and safe solution for industrial applications where non-permanent fixing is required or where it is not possible to drill holes. For example, they are commonly…
JW Winco now offers nuts with hygienic design
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 1580 Nuts with Hygienic Design. The GN 1580 Stainless Steel Nuts are certified according to European Hygienic Engineering and Design Group guidelines, making them suitable for use in hygienic areas. “The sealed flange surface enables components to be…
Precise and compact 300-mm hollow-core motorized rotary stage from OES
The new AY110-300 motorized rotary stage from Optimal Engineering Systems, Inc. (OES) features a large 180 mm (7.087 in.) open aperture. This precision, large open aperture (hollow core), low profile rotary stage is just 65 mm (2.559 in.) high and its foot print is 303 mm by 319 mm (11.929 in. by 12.559 in.) not […]
Extended range of ball plungers from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 615.5 Ball Plungers in A4 Stainless Steel, with Ceramic Ball, GN 615.8 Ball Plungers in Stainless Steel or Steel, with Friction Bearing, with Slot, and GN 615.9 Ball Plungers in Stainless Steel or Steel, with Friction Bearing, with…
Spirol offering pre-stacked disc springs
Spirol has announced that it is now offering pre-stacked Disc Springs. While some applications only require a single Disc, others require a number of Disc Springs to be stacked in a particular configuration to achieve specific force/deflection performance requirements. Historically, the company has supplied Disc Springs in bulk packaging, and the customers have fashioned the Discs…
Economical spring testing system
The L.S. Starrett Co. a leading global manufacturer of precision hand tool gages, a broad range of force testing, metrology equipment, and more, announced the introduction of a basic, affordable Spring testing system for compression and extension springs. The Starrett S1 Spring Testing Systems were developed for high volume production testing for users seeking more…
New Spirawave nested wave spring series from Smalley
Smalley now offers a new nested Spirawave wave spring series. Smalley has been producing nested wave springs as customs for over 30 years, but this will mark the first standard series on the market. These multiple turn, flat wire wave springs are coiled in parallel to produce two to three times as much force as […]
JW Winco now offers plastic torque limiting wing nuts
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available EN 5320 Plastic Torque Limiting Wing Nuts. These wing nuts are used when the manually applied torque is to be limited. “When turned clockwise, the torque of the wing nut triggers an ‘over-engagement’ when the specified torque is reached.…
Panel fastening draw latch with updated finish for long-term performance
Southco, Inc., a global leader in engineered access solutions, has refreshed its successful R2 Panel Fastening Draw Latch series with an updated version that combines a reliable, industrial grade finish with strength and durability. Refreshed with galvanized steel, Southco’s new R2 Panel Fastening Draw Latch delivers a consistent appearance over time while maintaining the product’s…
Chrome platted hinges from JW Winco
JW Winco, Inc., A Ganter Company, now has Chrome Platted GN 237 Hinges, Countersunk Thru Holes or Threaded Stud Type in Zinc Die-cast. Chrome Platted GN 237 Hinges offer corrosion resistance due to its chrome plating, the Zinc Die-cast Hinges are also aesthetically pleasing due to their chrome finish. Typically sold with U-handles, door latches, and similar…
Secure latching for limited space applications
The line of A3 Slide Latches have a new version that is 35% shorter than the smallest A3 product series, providing reliable performance for applications where space is at a premium. The mini A3 Slide Latch is suitable for the smallest applications including rack-mount servers, automotive storage panels and general enclosures. Southco’s A3 Mini Slide…
JW Winco introduces inch set screws steel, with brass or nylon tip
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, has recently introduced WN-913.3 Inch Size Steel Set Screws, with Brass or Nylon Tip. These set screws, with a black oxide finish, are used primarily in applications where you want to avoid the marring of a shaft or damaging a soft piece…
Hand actuated rotary latch simplifies rotary system integration
Southco, Inc., a global leader in engineered access solutions, has expanded its line of rotary latches with a new version that can be triggered by hand via an integrated plastic knob, eliminating the need for a separate cable and actuator. The hand actuated R4-20 Rotary Latch features steel construction, providing a robust, long-lasting solution for…
3M adhesive lab increases opportunities for hands-on collaboration with industry experts
As more and more industries are moving towards automation, design engineers are being challenged to increase production efficiencies and solve assembly challenges. Exploring new solutions and pushing the boundaries of what’s possible is the everyday expectation. That’s why 3M has developed the Global Adhesive Solutions Lab – to provide one-on-one attention and individualized solutions designed…
Extended range of shaft collars from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers an extended range of Shaft Collars that include a variety of different configurations. The products include Semi-Split Shaft Collars GN 7062.1 with Extension Tapped Holes, GN 7062.2 with Flange Holes, and GN 7062.3 with Damping Washer, along with Two-Piece Shaft […]
Glob top epoxy meets NASA low outgassing specifications
Master Bond EP17HTND-CCM is a new single component epoxy that is not premixed and frozen. It is more convenient to handle, apply and store than typical two component glob top systems. This black, heat curable compound has a flowable paste consistency suitable for glob top, chip coating and bonding applications. EP17HTND-CCM meets NASA low outgassing…
JW Winco offers zinc die-cast ball catches
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers GN 4490 Zinc Die-Cast Ball Catches. JW Winco’s GN 4490 ball catches are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining…
JW Winco offers zinc die-cast ball catches
JW Winco Inc., A Ganter Company now offers GN 4490 Zinc Die-Cast Ball Catches. JW Winco’s GN 4490 ball catches are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining element that engages in the ball housing…