Pneumatic toggle clamps fix workpieces in place, position mechanisms, and hold molds together. In this way, they not only simplify handling, but they also enable fully automated processes. JW Winco offers a number of flexible solutions for this purpose. Toggle clamps of the series GN 860 and GN 862 have an important and unique property:…
JW Winco slam latches zinc die-cast, with and without lock
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 936 Slam Latches Zinc Die-Cast, with and without Lock. The design of the GN 936 slam latches enable doors and closures to close effortlessly. “The latch engages automatically when the door is closed preventing the door from opening…
JW Winco’s heavy duty ball lock pins stainless steel, with stainless steel shank
JW Winco, Inc., A Ganter Company, a leading supplier of standard industrial machine components, announced it has expanded its line of GN 113.10 Heavy Duty Ball Lock Pins Stainless Steel, with Stainless Steel Shank AISI 630. The GN 113.10 stainless steel rapid release pins have an extreme load capacity and are used for quick fixing,…
Steel and stainless steel vertical acting toggle clamps and more from JW Winco
JW Winco, Inc., A Ganter Company, a leading supplier of standard industrial machine components, now has available GN 810.4 Steel and Stainless Steel Vertical Acting Toggle Clamps, Safety Hook and Vertical Mounting Base. These vertical acting toggle clamps have two locking features in both the closed and open positions. In addition, they have a safety…
JW Winco offers expanded line of nylon plastic wing nuts
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, announced it has expanded its line of GB-FP Wing Nuts Nylon Plastic, with Tapped Through Insert. “The tapped through wing nuts allow full clamping, unrestricting the threaded stud the wing nut is being used on,” said John Winkler, CEO, Office of the…
JW Winco offers stainless steel folding handles
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 425.9 Folding Handles in Stainless Steel. The GN 425.9 stainless steel folding handles are used for lifting and pulling where the handle must only protrude a short distance in the resting position. “Two versions of the folding handles…
Steel and stainless steel leveling sets from JW Winco
JW Winco, Inc., A Ganter Company, a leading supplier of standard industrial machine components, now has available GN 360 Steel & Stainless Steel Leveling Sets. The GN 360 Leveling Sets, appropriate for the work-holding and machine building industries, are used for leveling, supporting, and holding, as well as to compensate for any slope when setting…
JW Winco offers expanded line of hollow knurled knobs
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, announced it has expanded its line of GN 421 Hollow Knurled Knobs Nylon Plastic, With Steel or Stainless Steel Threaded Stud. The GN 421 Hollow Knurled Knobs have a variety of applications, including clamping, adjusting, and securing. “On clamping operations, the partially…
T-Handle Rapid Release Pins from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available WN 100.1 T-Handle Inch size Rapid Release Pins with Stainless Steel Shank.The WN 100.1 T-handle rapid release pins have a wide range of applications in fastening, locating, and alignment applications. “The pin will not release until the button on…
JW Winco now offers expanded range of rod end bearings
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has an expanded range of Rod End Bearings available, including GN 648.1/GN 648.2 Steel Zinc-Plated, Tapped Type or with Threaded Stem and GN 648.5/GN 648.6 Stainless Steel, Tapped Type or with Threaded Stem. The GN 648.1 and the GN 648.2 zinc […]
Rubber spacer disks vulcanized, with steel plate from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available, GN 438 Vulcanized Rubber Spacer Disks, with a Steel Plate. The GN 438 rubber spacer disks provide a dampening and muffling function, protecting surfaces from damage. “By stacking several spacer disks on each other, the spring rate of the…
JW Winco now offers nuts with hygienic design
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 1580 Nuts with Hygienic Design. The GN 1580 Stainless Steel Nuts are certified according to European Hygienic Engineering and Design Group guidelines, making them suitable for use in hygienic areas. “The sealed flange surface enables components to be…
Extended range of ball plungers from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available GN 615.5 Ball Plungers in A4 Stainless Steel, with Ceramic Ball, GN 615.8 Ball Plungers in Stainless Steel or Steel, with Friction Bearing, with Slot, and GN 615.9 Ball Plungers in Stainless Steel or Steel, with Friction Bearing, with…
JW Winco now offers plastic torque limiting wing nuts
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now has available EN 5320 Plastic Torque Limiting Wing Nuts. These wing nuts are used when the manually applied torque is to be limited. “When turned clockwise, the torque of the wing nut triggers an ‘over-engagement’ when the specified torque is reached.…
Chrome platted hinges from JW Winco
JW Winco, Inc., A Ganter Company, now has Chrome Platted GN 237 Hinges, Countersunk Thru Holes or Threaded Stud Type in Zinc Die-cast. Chrome Platted GN 237 Hinges offer corrosion resistance due to its chrome plating, the Zinc Die-cast Hinges are also aesthetically pleasing due to their chrome finish. Typically sold with U-handles, door latches, and similar…
JW Winco introduces inch set screws steel, with brass or nylon tip
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, has recently introduced WN-913.3 Inch Size Steel Set Screws, with Brass or Nylon Tip. These set screws, with a black oxide finish, are used primarily in applications where you want to avoid the marring of a shaft or damaging a soft piece…
Extended range of shaft collars from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers an extended range of Shaft Collars that include a variety of different configurations. The products include Semi-Split Shaft Collars GN 7062.1 with Extension Tapped Holes, GN 7062.2 with Flange Holes, and GN 7062.3 with Damping Washer, along with Two-Piece Shaft […]
JW Winco offers zinc die-cast ball catches
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers GN 4490 Zinc Die-Cast Ball Catches. JW Winco’s GN 4490 ball catches are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining…
JW Winco offers zinc die-cast ball catches
JW Winco Inc., A Ganter Company now offers GN 4490 Zinc Die-Cast Ball Catches. JW Winco’s GN 4490 ball catches are used, for example, to hold flaps and doors closed that must be opened and closed frequently and easily. They consist of a ball housing and a retaining element that engages in the ball housing…
JW Winco opens new branch in Mexico
JW Winco Inc., A Ganter Company, a leading supplier of standard industrial machine components, announced it has opened a new branch in Mexico at Parque industrial Makro, Bodega 10, Santa Catarina, N.L. 66359. The office phone number is +52(81) 2721-4021. The new branch in Mexico, which has more than 1,200 square feet of office space…
Stainless steel magnetic quick release pins available from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers GN 124.1 Stainless Steel Magnetic Quick Release Pins. The GN 124.1 Quick Release Pins from JW Winco are used for quickly connecting various parts and workpieces that are made of materials like iron and steel. A neodymium magnet is recessed…
JW Winco offers hygienic design adjustable hand levers
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, is the first to offer and manufacture the new GN 305 Hygienic Design Adjustable Hand Levers. The adjustable hand levers with solid stainless steel handles are intended for use in hygienic design applications, such as in the packaging, food processing, medical, and…
Stainless steel multiple-joint hinges available from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, now offers GN 7237 Stainless Steel Multiple-Joint Hinges with Internal Mounting Brackets and an Opening Angle of 180°. JW Winco’s GN 7237 Stainless Steel Multiple-Joint Hinges are installed on the inside of flaps, hatches, or compartment doors to save space and ensure protection…
Cabinet “U” handles aluminum, with tapped holes or through holes from JW Winco
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, offers Series GN 328 and GN 428 Cabinet “U” Handles Aluminum, with Tapped Holes or Through Holes. Recognized for their stability, and ergonomic grip, these handles are made from solid aluminum and reflect the latest developments in industrial design. They have been…
JW Winco offers steel and stainless steel locking toggle clamps
JW Winco, Inc., A Ganter Company, a supplier of standard industrial machine components, has announced the introduction of Steel and Stainless Steel Locking Toggle Clamps. The RoHS compliant GN 820.3 Horizontal Acting Toggle Clamps, with a horizontal mounting base and safety hook latch, have a safety function whereby, during closing, a spring-loaded safety hook latch…